Scope 1, 2 and 3 Emissions: How to Measure, Analyse and Use Your Emissions Data

Understanding Scope 1 2 3 emissions is an important first step for organisations looking to measure their carbon footprint, meet reporting requirements and develop an effective carbon reduction strategy.

However, identifying which emissions belong in each scope is only part of the process. Organisations also need reliable data, appropriate calculation methodologies and a way of turning their findings into meaningful action.

When approached effectively, carbon accounting can do more than produce an annual emissions figure. It can help organisations identify carbon hotspots, understand energy performance, prioritise efficiency opportunities and make more informed operational and procurement decisions.

This guidance explains what Scope 1, 2 and 3 emissions are, how they can be measured and, importantly, how organisations can use the data to support wider carbon management.

What are Scope 1, 2 and 3 Emissions?

The GHG Protocol Corporate Standard groups greenhouse gas emissions into three scopes.

Scope 1 Emissions: Direct Emissions

Scope 1 emissions are direct greenhouse gas emissions from sources owned or controlled by an organisation.
Examples include:

  • Natural gas used in boilers and heating systems
  • Petrol or diesel used by company-owned vehicles
  • Fuel used by generators or other equipment
  • Emissions from industrial processes
  • Fugitive emissions, such as refrigerant leakage.

Because organisations have direct influence over many of these activities, Scope 1 can provide important insight into operational performance.

Scope 2 Emissions: Purchased Energy

Scope 2 emissions are indirect emissions associated with the generation of purchased energy consumed by an organisation.

For many UK businesses, electricity will represent the largest component.

Scope 2 reporting can use both location-based and market-based methodologies. Location-based reporting reflects the average emissions intensity of the electricity grid, while market-based reporting reflects the electricity products and contractual arrangements an organisation has chosen.

Understanding the difference is important when interpreting changes in reported emissions.

Scope 3 Emissions: Value Chain Emissions

Scope 3 emissions cover other indirect emissions occurring across an organisation’s value chain.

The GHG Protocol divides Scope 3 into 15 categories covering upstream and downstream activities. These include:

  • Purchased goods and services
  • Capital goods
  • Fuel and energy related activities
  • Transportation and distribution
  • Operational waste
  • Business travel
  • Employee commuting
  • Leased assets
  • Use of sold products
  • End-of-life treatment of sold products.

Not every category will be equally significant for every organisation. Establishing which sources are relevant and material is therefore an important part of developing a Scope 3 inventory.

What Data Do You Need to Calculate Carbon Emissions?

Calculating emissions begins with activity data.

The type of data needed depends upon the emissions source. Examples might include:

Carbon emissions activity data examples for natural gas, fleet fuel, electricity, refrigerants, business travel, waste, purchased goods and freight.

Organisations can then apply an appropriate emissions factor to convert that activity into carbon dioxide equivalent (CO2e).

At its simplest:

Activity data × emissions factor = greenhouse gas emissions

For UK organisations, government greenhouse gas conversion factors provide emissions factors for activities ranging from energy consumption and vehicles to waste and business travel.

Consistency is particularly important. Changes to methodologies, emission factors or organisational boundaries can otherwise make year-on-year comparisons misleading.

How Can Organisations Improve Scope 3 Data?

Scope 3 is frequently the most difficult part of an emissions inventory because much of the information sits outside the organisation.

Where accurate supplier-specific information is unavailable, businesses may initially use industry averages or spend-based data to estimate emissions. This can help establish a baseline and identify categories that warrant further investigation.

It shouldn’t necessarily be the end point.

Organisations can progressively improve data quality by focusing their efforts on the suppliers, materials and categories responsible for the greatest proportion of emissions. This could involve requesting product-level emissions information, engaging strategically important suppliers or incorporating carbon information requirements into procurement processes.

Crucially, businesses shouldn’t allow the pursuit of perfect Scope 3 data to delay action. An initial estimate can help identify hotspots, while the quality of the underlying information improves over successive reporting cycles.

What Can Your Emissions Data Tell You?

Once a carbon footprint has been calculated, the next step is to analyse what is driving it.

An organisation-wide emissions figure has limited diagnostic value on its own. Greater insight can come from breaking emissions down by:

  • Building or site
  • Asset
  • Fuel type
  • Vehicle
  • Supplier
  • Purchased commodity
  • Business activity
  • Scope 3 category.

This can highlight where emissions are concentrated and where reduction efforts should be prioritised.

Comparing emissions with appropriate business metrics can add another layer of insight.

A property organisation, for example, might monitor emissions per square metre. A manufacturer might analyse emissions per unit of production, while another business could consider carbon intensity relative to revenue or numbers of employees.

These measures shouldn’t necessarily replace absolute emissions, but they can help organisations understand whether changing emissions are the result of genuine efficiency improvements, business growth or contraction.

What Do Scope 1 Emissions Tell You About Operational Performance?

Scope 1 data can help identify inefficiencies within areas under an organisation’s direct control.

Comparing gas consumption between similar buildings, for example, could identify an unusually energy-intensive site that warrants investigation.

The cause might be inefficient heating equipment, inappropriate operating hours, control problems, poor building fabric or simply different occupancy patterns. Carbon data does not provide the diagnosis by itself, but it can show where further investigation is worthwhile.

The same principle can be applied to fleet fuel use, process emissions and other Scope 1 sources.

This turns carbon measurement from an annual reporting exercise into a tool for identifying potential operational improvements.

What Can Scope 2 Emissions Tell You About Energy Performance?

Scope 2 emissions can provide insight into electricity-related carbon performance, but they need to be interpreted alongside energy consumption.

An organisation could reduce its market-based Scope 2 emissions by changing its electricity procurement arrangements while its actual electricity consumption remains unchanged or even increases.

That is why organisations should consider metrics such as kWh alongside tCO2e.

Energy consumption can also be normalised against factors such as floor area, occupancy, production or operational hours, allowing organisations to distinguish procurement-related carbon reductions from genuine improvements in energy efficiency.

Effective energy management should therefore address both sides of the equation: the carbon intensity of the energy being purchased and how efficiently that energy is being used.

How Can Scope 3 Inform Procurement?

Scope 3 analysis can help procurement teams understand where carbon is concentrated across the supply chain.

If purchased goods and services represent a large proportion of an organisation’s footprint, the next step may be to break the category down further by supplier, commodity or product group.

This can help identify where improved data or supplier engagement would have the greatest value.

Carbon can then become one factor within wider procurement decisions, alongside cost, quality, service, resilience and other sustainability criteria.

Importantly, this does not mean automatically selecting the supplier reporting the lowest carbon figure. Differences in calculation methodology, organisational boundaries and data quality need to be understood if comparisons are to be meaningful.

Turning Emissions Data Into Carbon Reduction Opportunities

The value of emissions measurement ultimately lies in what happens next.

Once significant emissions sources have been identified, organisations can develop targeted interventions.

Carbon reduction opportunities across Scope 1, 2 and 3 emissions, including energy efficiency, electrification, renewable energy, supplier engagement, sustainable procurement, logistics and business travel.

Potential projects can then be compared using both financial and carbon metrics, including investment required, expected energy savings, tonnes of CO2e avoided and payback period.

This can help organisations prioritise interventions that deliver the greatest impact with the resources available.

How Often Should Emissions Performance be Reviewed?

An organisation may calculate its formal carbon footprint annually, but that does not mean performance should only be reviewed once a year.

For energy-intensive Scope 1 and 2 sources in particular, underlying consumption data can be monitored much more frequently.

Monthly energy analysis, half-hourly electricity data and effective sub-metering can expose unusual consumption patterns long before they appear in an annual carbon footprint.

For Scope 3, reporting frequency may depend on the availability of procurement and supplier data.

Organisations can nevertheless regularly review their most significant categories and progressively improve the quality of the data supporting them.

Moving From Carbon Reporting to Carbon Management

Measuring Scope 1, 2 and 3 emissions provides an essential baseline, but producing the footprint should not be the end of the process.

The greater value comes from understanding what is driving emissions, identifying where performance can be improved and tracking whether interventions actually deliver the expected reductions.

For organisations developing their approach, a useful cycle is:

Carbon management cycle showing five stages: measure, analyse, prioritise, act and review

Over time, this transforms emissions reporting from a retrospective compliance exercise into an ongoing management process.

And that is ultimately where better carbon data delivers the most value: not simply demonstrating what an organisation emitted last year, but helping it decide what to improve next.

Author

Written by Tom McLeish – Senior Energy Consultant
As a Chartered Energy Manager, CIBSE certified Low Carbon Consultant and DEC/ESOS Assessor, Tom is experienced in providing energy saving recommendations to a broad range of customers using remote monitoring software or through energy audits.

Related articles:


Power to make change

We believe that people power can change the world. Our experts are here to help you stay ahead of industry change, make informed decisions, and have a positive impact on the planet. Together we can make a difference.

Discover our insights

Becoming Net Zero

Leading by example, we became carbon neutral in 2023 and are committed to achieving net zero business emissions by 2030.

Discover our strategy

Employee Ownership

As an Employee Ownership Trust, we embrace the three pillars of good communication, governance and leadership, putting our people first.

Who is TEAM Energy?

We will be by your side

Staying at the forefront of industry, we embrace and drive change, delivering solutions at pace and scale to meet the modern challenges of energy and sustainability.

Meet our people